Short Pitch Precision Roller Chains and Driving Chains 08b Series45# Steel Hub Sprocket for Transmission Belt Gearbox Parts General Duty Conveyor

• Customization: Available
• Standard Or Nonstandard: Nonstandard, Standard
• Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
• Model NO.: 100B
• Manufacturing Method: Cut Gear, Rolling Gear
• Toothed Portion Shape: Spur Gear
• Material: Alloy Steel, 1045, Stainless Steel, Q235, Brass
• Type: Sprocket, Circular Gear
• Transmission Type: Flexible
• Automatic Production Line: Assembly
• Certification: ISO, CE, Lr, ABS
• Automation: Automation
• Flexible Production: Intelligent Manufacturing
• Rhythm: Non Flow Production Line
• Production Scope: Product Line
• After-Sales Service: 7*24hours
• Warranty: 1 Year
• Transport Package: According to Customer Requirements
• Specification: Alloy steel
• Trademark: SMCC OR NO MARK
• Origin: China
• HS Code: 8483900090
• Production Capacity: 100000000
• Package Size: 20.00cm * 30.00cm * 20.00cm
• Package Gross Weight: 20.000kg

Product Description

SPROCKET  1/2'' X 5/16''  08B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3					13.0mm
Radius Width C					1.3mm
Tooth Width b1					7.0mm
Tooth Width B1					7.2mm
Tooth Width B2					21.0mm
Tooth Width B3					34.9mm
08B SERIES ROLLER CHAINS
Pitch					12.7 mm
Internal Width					7.75 mm
Roller Diameter					8.51 mm

 

Z	de	dp	SIMPLEX			DUPLEX			TRIPLEX
			dm	D1	A	dm	D2	A	dm	D3	A
8	37.2	33.18	20	10	25	20	10	32	20	10	46
9	41.0	37.13	24	10	25	24	10	32	24	12	46
10	45.2	41.10	26	10	25	28	10	32	28	12	46
11	48.7	45.07	29	10	25	32	12	35	32	14	50
12	53.0	49.07	33	10	28	35	12	35	35	14	50
13	57.4	53.06	37	10	28	38	12	35	38	14	50
14	61.8	57.07	41	10	28	42	12	35	42	14	50
15	65.5	61.09	45	10	28	46	12	35	46	14	50
16	69.5	65.10	50	12	28	50	14	35	50	16	50
17	73.6	69.11	52	12	28	54	14	35	54	16	50
18	77.8	73.14	56	12	28	58	14	35	58	16	50
19	81.7	77.16	60	12	28	62	14	35	62	16	50
20	85.8	81.19	64	12	28	66	14	35	66	16	50
21	89.7	85.22	68	12	28	70	16	40	70	16	55
22	93.8	89.24	70	12	28	70	16	40	70	16	55
23	98.2	93.27	70	14	28	70	16	40	70	16	55
24	101.8	97.29	70	14	28	75	16	40	75	16	55
25	105.8	101.33	70	14	28	80	16	40	80	16	55
26	110.0	105.36	70	16	30	85	16	40	85	20	55
27	114.0	109.40	70	16	30	85	16	40	85	20	55
28	118.0	113.42	70	16	30	90	16	40	90	20	55
29	122.0	117.46	80	16	30	95	16	40	95	20	55
30	126.1	121.50	80	16	30	100	16	40	100	20	55
31	130.2	125.54	90	16	30	100	20	40	110	20	55
32	134.3	129.56	90	16	30	100	20	40	110	20	55
33	138.4	133.60	90	16	30	100	20	40	110	20	55
34	142.6	137.64	90	16	30	100	20	40	110	20	55
35	146.7	141.68	90	16	30	100	20	40	110	20	55
36	151.0	145.72	90	16	35	100	20	40	120	25	55
37	154.6	149.76	90	16	35	100	20	40	120	25	55
38	158.6	153.80	90	16	35	100	20	40	120	25	55
39	162.7	157.83	90	16	35	100	20	40	120	25	55
40	166.8	161.87	90	16	35	100	20	40	120	25	55
41	171.4	165.91	*90	16	40	*108	20	50	*120	25	60
42	175.4	169.94	*90	16	40	*108	20	50	*120	25	60
43	179.7	173.98	*90	16	40	*108	20	50	*120	25	60
44	183.8	178.02	*90	16	40	*108	20	50	*120	25	60
45	188.0	182.07	*90	16	40	*108	20	50	*120	25	60
46	192.1	186.10	*90	16	40	*108	20	50	*120	25	60
47	196.2	190.14	*90	16	40	*108	20	50	*120	25	60
48	200.3	194.18	*90	16	40	*108	20	50	*120	25	60
49	204.3	198.22	*90	16	40	*108	20	50	*120	25	60
50	208.3	202.26	*90	16	40	*108	20	50	*120	25	60
51	212.1	206.30	*90	16	40	*108	20	50	*120	25	60
52	216.1	210.34	*90	16	40	*108	20	50	*120	25	60
53	220.2	214.37	*90	16	40	*108	20	50	*120	25	60
54	224.1	218.43	*90	16	40	*108	20	50	*120	25	60
55	228.1	222.46	*90	16	40	*108	20	50	*120	25	60
56	232.2	226.50	*90	16	40	*108	20	50	*120	25	60
57	236.4	230.54	*90	16	40	*108	20	50	*120	25	60
58	240.5	234.58	*90	16	40	*108	20	50	*120	25	60
59	244.5	238.62	*90	16	40	*108	20	50	*120	25	60
60	248.6	242.66	*90	16	40	*108	20	50	*120	25	60
62	256.9	250.74	*90	16	40	*108	20	50	*120	25	60
64	265.1	258.82	*90	16	40	*108	20	50	*120	25	60
65	269.0	262.86	*90	16	40	*108	20	50	*120	25	60
66	273.0	266.91	*90	16	40	*108	20	50	*120	25	60
68	281.0	274.99	*90	16	40	*108	20	50	*120	25	60
70	289.0	283.07	*90	16	40	*108	20	55	*120	25	60
72	297.2	291.15	*90	16	40	*108	20	55	*120	25	60
75	309.2	303.28	*90	16	40	*108	20	55	*120	25	60
76	313.2	307.32	*90	16	40	*108	20	55	*120	25	60
78	321.4	315.40	*90	16	40	*108	20	55	*120	25	60
80	329.4	323.49	*90	16	40	*108	20	55	*120	25	60
85	349.0	343.69	*90	16	40	*110	20	55	*120	25	60
90	369.9	363.90	*90	16	40	*110	20	55	*120	25	60
95	390.1	384.11	*90	16	40	*110	20	55	*120	25	60
100	410.3	404.32	*90	16	40	*110	20	55	*120	25	60
110	450.7	444.74	*90	16	40	*110	20	55	*120	25	60
114	466.9	460.91	*90	16	40	*110	20	55	*120	25	60
120	491.2	485.16	*90	16	40	*110	20	55	*120	25	60
125	511.3	505.37	*90	16	40	*110	20	55	*120	25	60

Notice: *welding hub

BASIC INFO.
 

Product name	DIN ISO Standard Sprocket for Roller Chain
Materials Available	1. Stainless Steel: SS304, SS316, etc
	2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
	3. OEM according to your request
Surface Treatment	Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic	Fire Resistant, Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion	ISO DIN ANSI & Customer Drawings
Size	Customer Drawings & ISO standard
Application	Industrial transmission equipment
Package	Wooden Case / Container and pallet, or made-to-order
Certificate	ISO9001: 2008
Advantage	Quality first, Service first, Competitive price, Fast delivery
Delivery Time	20 days for samples. 45 days for official order.

INSTALLATION AND USING

The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STANDARDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references^[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size	Pitch	Maximum Roller Diameter	Minimum Ultimate Tensile Strength	Measuring Load
25	0.250 in (6.35 mm)	0.130 in (3.30 mm)	780 lb (350 kg)	18 lb (8.2 kg)
35	0.375 in (9.53 mm)	0.200 in (5.08 mm)	1,760 lb (800 kg)	18 lb (8.2 kg)
41	0.500 in (12.70 mm)	0.306 in (7.77 mm)	1,500 lb (680 kg)	18 lb (8.2 kg)
40	0.500 in (12.70 mm)	0.312 in (7.92 mm)	3,125 lb (1,417 kg)	31 lb (14 kg)
50	0.625 in (15.88 mm)	0.400 in (10.16 mm)	4,880 lb (2,210 kg)	49 lb (22 kg)
60	0.750 in (19.05 mm)	0.469 in (11.91 mm)	7,030 lb (3,190 kg)	70 lb (32 kg)
80	1.000 in (25.40 mm)	0.625 in (15.88 mm)	12,500 lb (5,700 kg)	125 lb (57 kg)
100	1.250 in (31.75 mm)	0.750 in (19.05 mm)	19,531 lb (8,859 kg)	195 lb (88 kg)
120	1.500 in (38.10 mm)	0.875 in (22.23 mm)	28,125 lb (12,757 kg)	281 lb (127 kg)
140	1.750 in (44.45 mm)	1.000 in (25.40 mm)	38,280 lb (17,360 kg)	383 lb (174 kg)
160	2.000 in (50.80 mm)	1.125 in (28.58 mm)	50,000 lb (23,000 kg)	500 lb (230 kg)
180	2.250 in (57.15 mm)	1.460 in (37.08 mm)	63,280 lb (28,700 kg)	633 lb (287 kg)
200	2.500 in (63.50 mm)	1.562 in (39.67 mm)	78,175 lb (35,460 kg)	781 lb (354 kg)
240	3.000 in (76.20 mm)	1.875 in (47.63 mm)	112,500 lb (51,000 kg)	1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches)	Pitch expressed in eighths	ANSI standard chain number	Width (inches)
^1⁄4	^2⁄8	25	^1⁄8
^3⁄8	^3⁄8	35	^3⁄16
^1⁄2	^4⁄8	41	^1⁄4
^1⁄2	^4⁄8	40	^5⁄16
^5⁄8	^5⁄8	50	^3⁄8
^3⁄4	^6⁄8	60	^1⁄2
1	^8⁄8	80	^5⁄8

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An "H" following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, "10 speed chain". Hub gear or single speed bicycles use 1/2" x 1/8" chains, where 1/8" refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at one and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed Worldwide Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve worldwide range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.