08agb1244-85 Sprocket Wheel with ANSI B 29.1 Standards

• Customization: Available
• Standard Or Nonstandard: Nonstandard, Standard
• Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
• Hardness: Hardened Tooth Surface
• Manufacturing Method: Cut Gear, Rolling Gear
• Toothed Portion Shape: Spur Gear
• Material: Alloy Steel, 1045, Stainless Steel, Q235, Brass
• Type: Sprocket, Circular Gear
• Transmission Type: Flexible
• Automatic Production Line: Assembly
• Certification: ISO, CE, Lr, ABS
• Automation: Automation
• Flexible Production: Intelligent Manufacturing
• Rhythm: Non Flow Production Line
• Production Scope: Product Line
• After-Sales Service: 7*24hours
• Warranty: 1 Year
• Transport Package: According to Customer Requirements
• Specification: Alloy steel
• Trademark: SMCC OR NO MARK
• Origin: China
• HS Code: 8483900090
• Production Capacity: 100000000
• Package Size: 50.00cm * 30.00cm * 20.00cm
• Package Gross Weight: 20000.000kg

Product Description

SPROCKET 08A SERIES SPROCKETS
 

08A GB1244-85 DIN8188 ISO/R606 ANSI B 29. 1	Sprocket Tooth Parameters(mm)
	Pitch	p	12. 70
	Roller Diameter	d-φ	7.95
	Radius of Arc	r3	13.5
	Chamfer Angle Width	C	1.6
	Rear Width	B1	7.2
	Rear Width	b1	7
	Rear Width	B2	21.4
	Rear Width	B3	35.8

Z	de	dp	Simplex			Duplex			Triplex
			dm	D1	A	dm	D2	A	dm	D3	A
8	39.3	33.18	20	10	25
9	43.2	37.13	24	10	25
10	47.2	41.10	26	10	25	28	10	32
11	51.2	45.07	29	10	25	30	10	32
12	55.2	49.07	33	10	25	35	12	35
13	59.2	53.06	37	10	28	38	12	35
14	63.2	57.07	41	10	28	42	12	35	42	16	50
15	67.2	61.09	45	10	28	46	12	35	46	16	50
16	71.2	65.10	50	12	28	50	16	38	50	16	50
17	75.2	69.11	52	12	28	54	16	38	54	16	50
18	79.2	73.14	56	12	28	58	16	38	58	16	50
19	83.3	77.16	60	12	28	62	16	38	62	16	50
20	87.3	81.19	64	12	28	66	16	38	66	16	50
21	91.3	85.22	68	14	28	70	16	40	70	16	55
22	95.4	89.24	70	14	28	70	16	40
23	99.4	93.27	70	14	28	70	16	40
24	103.4	97.29	70	14	28	75	16	40
25	107.4	101.33	70	14	28	80	16	40	80	16	55
26	111.5	105.36	70	16	30	85	16	40
27	115.5	109.40	70	16	30	85	16	40
28	119.5	113.42	70	16	30	90	16	40
29	123.6	117.46	80	16	30	90	16	40
30	127.6	121.50	80	16	30	100	16	40	100	20	55
31	131.6	125.54	90	16	30	100	16	40
32	135.7	129.59	90	16	30	100	16	40
33	139.7	133.60	90	16	30	100	16	40
34	143.8	137.64	90	16	30	100	16	40
35	147.8	141.68	90	16	30	100	16	40
36	151.8	145.72	90	16	35	100	20	40
37	155.9	149.76	90	16	35	100	20	40
38	159.9	153.80	90	16	35	100	20	40
39	163.9	157.83	90	16	35	100	20	40
40	168	161.87	90	16	35	100	20	40
42	176.6	169.95	100	20	35	110	20	40
45	188.7	182.07	100	20	35	110	20	40
48	200.8	194.18	100	20	35	110	20	40
50	208.9	202.26	100	20	35	110	20	40
54	225	218.43	100	20	35	110	20	40
57	237.2	230.54	100	20	35	110	20	40
60	249.3	242.66	100	20	35	110	20	40

BASIC INFO.
 

Product Name	DIN ISO Standard Sprocket for Roller Chain
Materials	1.Alloy steel: 40 chromium, 20CrMnTi, etc. 2.Stainless steel: SS304, SS316, etc. 3.OEM Customized according to your requirements
Surface Treatment	Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic	Fire Resistant, Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Standard	ISO DIN ANSI Customer Drawings
Size	Customer Drawings & ISO standard
Application	Industrial transmission equipment
Package	Wooden Case / Container and pallet, or made-to-order
Advantage	Quality first, Service first, Competitive price, Fast delivery
Delivery Time	20 days for samples. 45 days for official order.
Heat treatment	1.Hardening Tempering 2.Cemented Quenching 3.Surface hardening

INSTALLATION AND USING

The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed Worldwide Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve worldwide range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
 

FAQ

Q:Why choose us ?
A:We are a manufacturer, we have manufactured valve for over 20 years .
     1. Reliable Quality Assurance System
     2. Cutting-Edge Computer-Controlled CNC Machines
     3. Bespoke Solutions from Highly Experienced Specialists
     4. Customization and OEM Available for Specific Application
     5. Extensive Inventory of Spare Parts and Accessories
     6. Well-Developed Worldwide Marketing Network
     7. Efficient After-Sale Service System

Q. what is your payment term? 
A: 30% TT deposit, 70% balance T/T before shipping.

Q:Can we print our logo on your products?
A: yes, we offer OEM/ODM service, we support the customized logo, size, package,etc.

Q: Can you make chains according to my CAD drawings?
A: Yes. Besides the regular standard chains, we produce non-standard and custom-design products to meet the specific technical requirements. In reality, a sizable portion of our production capacity is assigned to make non-standard products.

Q: what is your main market?
A: North America, South America, Eastern Europe, Western Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia,
 
Q: Can I get samples from your factory?
A: Yes, Samples can be provided.
 
Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems