Alstom Filter 4 Inches Aluminium Dust Collector Diaphragm Control Pulse Solenoid Valve

• Certification: CE, ISO, RoHS, UL, GS, CQC, ETL, MSDS
• Installation Method: Vertical
• Operation Type: Automatic
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 4inch Alstom Valve
• Medium Material: Chemical Synthetic Fiber
• Dust Collecting Method: Half Dry
• Type: Filter Cartridge Dust Collector
• Installation Nmethod: Vertical
• Operation Ntype: Automatic
• Usage: Lifting, Electricity, Mine, Industry, Medical
• Installation: Horizontal
• Current: DC
• Cooling Method: Forced Air-Cooled
• Automation: Automatic
• Magnetic Source: Electromagnetic
• Magnetic Field Strength: Weak
• Cylinder Number: Multi-Cylinder
• Structure: Portable
• Air Volume: >400m³/H
• Application Area: >61m²
• Power Source: AC Source
• Operating Principle: Active + Passive
• Purifying Technology: Synthetic Fiber
• Anion Density: >4000000PCS/M³
• Transport Package: According to Customer Requirements
• Specification: 910mm*340mm*29mm
• Trademark: SMCC OR NO MARK
• Origin: China
• HS Code: 84814000
• Production Capacity: 20000
• Package Size: 35.00cm * 30.00cm * 25.00cm
• Package Gross Weight: 20.000kg

Product Description

ALSTOM OPTIPOW AIR DUST COLLECTOR BASIC INFO

Model NO.	OPTIPOW 135	Valve Structure	Pilot Membrane Structure
Power Supply	DC Solenoid Valve	Usage	Drain, Dust Cleaning
Standard	DIN	Application	Industrial Usage
Used For	Dust Filter	Trademark	OPTIPOW
Specification	4"	Design static pressure	15 bar (1500 kPa)
Design temperature	100 °C	Operating pressure	< 6 bar
Operating pressure variation	3 bar unlimited nos	Operation temperature	50 °C

 

ALSTOM OPTIPOW AIR DUST COLLECTOR INTRODUCTION

The compact pulse valve for the Optipulse fabric filters of different types.
is a result of many years of experiences within the fabric filter technology area.
is quick acting with high efficiency.
has small dimensions, the figure after the name stands fir the diameter of the plunger.      
is primarily designed to be used in combination with circular pressure tank.
is easy to install and make service to.
has a very robust design, designed for normal use at air pressure up to 600kPa (6bar). 
Normal max operating temperature (compact pulse valve) 50°C.
Testing procedure for tank unit

1.Properly secure the complete assembly to the floor or a non-movable test fixture and then pressurize the tank unit to 200 kPa (2 bar) . Note that the pilot air should have the same pressure. Eliminate eventual leakage in the connections.
If it is impossible to achieve a pressure in the tank check the following points:
If there is a leakage through evacuation ports "B".
Check that the pilot air is connected and that there are no leakages in the connections.
Replace solenoid valve. Note the position of the mark on the side of the solenoid vs. The slit in the top cover when installing.
If a particular valve is leaking; dismount that and check that the plunge is operating free.
If necessary clean the surfaces.
If it is a common leakage; dismount all valves and check measure "A" , picture 8. If necessary, machine the surface of the pulse pipe. Note that the top of the pulse pipes must after machining be polished to avoid sharp edges and finally the tank has to be cleaned.
2.Turn off air supply.
3.Check pressure decrease in tank as a function of time. Allowed pressure decrease is 50 kPa per minute. Even if there is a higher leakage continue to 4.
4.Check the function of each valve by pulsing from 200 kPa. Repeat this for 3 cycles.
5.Repeat from 3. If the leakage still is high try to find out if there is some valve leaking more than other, dismount that and check plunge sealing surface and secondly measure "A" . If necessary, maching surface to right tolerance.
6.Mount valve and start from 3 again. This is to be repeated until an acceptable result is achieved.
7.The final result of the testing should be documented for each tank unit according to example on appendix A. A copy of the result should be returned back to the orderer but also enclosed with the pressure tank at delivery.

Q:Why choose us ?
A. we are a manufacturer, we have manufactured valve for over 20 years .
B. Reliable Quality Assurance System;
C. Cutting-Edge Computer-Controlled CNC Machines;
D. Bespoke Solutions from Highly Experienced Specialists;
E. Customization and OEM Available for Specific Application;
F. Extensive Inventory of Spare Parts and Accessories;
G. Well-Developed Worldwide Marketing Network;
H. Efficient After-Sale Service System
Q. what is your payment term? 
 A: 30% TT deposit, 70% balance T/T before shipping.
 
Q:Can we print our logo on your products?
A: yes, we offer OEM/ODM service, we support the customized logo, size, package,etc.
 
 Q: what is your main market?
A: North America, South America, Eastern Europe, Western Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia,
 
Q: Can I get samples from your factory?
A: Yes, Samples can be provided.
 
Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.